powder coating

As with most jobs, pricing will vary based on complexity of project, size, and potentially other factors.  The pricing here is listed as a guide.  Each project will start with a consultation with John Robarge and a final price for the work will be negotiated.  All pricing includes masking all threads, stripping, cleaning, degreasing, and coating parts.  There is an additional charge for colors such as clear coats and translucent/anodized/candy colors due to it being a 2-step coating process. 

All prices are estimates only and pricing will depend on amount of prep work involved.  Case aluminum and magnesium parts may experience out-gassing and/or bubbling in the finished powder coating.  We will take every precaution to avoid this, but cannot be held responsible for porous coatings. 

Automotive

Part - Price starts at:
  • A-Arm - $25.00-$45.00
  • Air Intake Piping - $1.00 per inch
  • Air Cleaner Base - $25.00-$35.00
  • Air Cleaner Lid - $15.00-$20.00
  • Battery Box - $30.00-$40.00
  • Battery Tray - $20.00-$30.00
  • Bolt Head (taped threads) - $2.00 Each
  • Brackets
    • Small - $10.00
    • Medium - $15.00
    • Large - $20.00
  • Brake Caliper (single pc.) - $30.00-$60.00 each
          (depending on the number of pistons)
  • Brake Caliper (2 pc.) - $40.00-$60.00 each
          (depending on the number of pistons)
  • Brake Caliper Bracket - $15.00 each
  • Brake Backing Plate - $15.00-$20.00 each
  • Brake Drum - $30.00-$40.00 each
  • Bumpers - $100.00-$200.00 
          (large off-road bumpers are $200+)
  • Carburetor - $60.00-$100.00
  • Coil Spring - $20.00-30.00 Each
  • Control Arm - $25.00-$40.00 each
  • Fan - $25.00-$35.00
  • Fan shroud - $50.00-$60.00
  • Fuel Tank - $100.00-$125.00
  • Fuel Cell - $60.00-$80.00
  • Fuel Rail - $25.00-$35.00
  • Headlight Buckets - $30.00 Per Pair
  • Headlight Ring - $20.00 Per Pair
  • Hood Hinges - $20.00-$40.00 Each
  • Hood Latch- Bottom - $15.00-$25.00
  • Hood Latch- Top - $15.00-$25.00
  • Hub Cap (metal) - $25.00 Each
  • Intake Manifold 4 - 6 - 8 Cylinder - $80.00 - $120.00
  • Intercooler (our heat transfer coating works better at dissipating heat) - $60.00-120.00 (depending on size)
  • Intercooler Piping - $1 per inch
  • License Plate Frame - $20.00
  • Lug Nuts - $2.00 Each
  • Oil pan - $55.00-$75.00
  • Pulley Under 4" Diameter - $20.00
  • Over 4" Diameter - $25.00
  • Radiator Support - $125.00-$175.00
  • Rear Housing Full Size - $150.00-$200.00
  • Narrowed - $100.00-$150.00
  • Roll Bar/Cage - $150.00-$250.00
  • Subframe - $250.00-$350.00
  • Springs - $30.00-$40.00 each
  • Strut bar upper (only middle section if ends come off) - $20.00
  • Strut bar upper (ends included as 1 full bar) - $40.00
  • Strut bar lower (only middle section if ends come off) - $15.00
  • Strut bar lower (ends included as 1 full bar) - $35.00
  • Strut bar ends - $15.00 each
  • Sway bar - $60.00-$80.00
  • Timing Cover - $30.00-$40.00
  • Transmission Pan - $35.00-$45.00
  • Turbo Compressor Housing-Inlet - $45.00
  • Valve Cover4 Cylinder - $50.00
  • Inline 6 Cylinder - $60.00
  • V-6 Cylinder - $80.00-$90.00 pair
  • V-8 Cylinder - $80.00-100.00 pair
  • Polished Lettering Add - $20.00-$30.00.
  • Washer - $1.00 Each
  • Water Pump (must remove bearings inside) - $40.00
  • Wheelie Bars - $80.00-$120.00
  • Windsheild Wiper Arms - $30.00 Pair

Motorcycle / ATV

Air Cleaner front - $20.00
Air Cleaner back - $15.00
​A-Arm - $20.00
Battery Base - $20.00
Battery Box - $30.00
​Battery Top Plate - $10.00
​Bolts (taped threads) - $2 each
​Brackets Small - $5.00
Brackets Medium - $10.00
​Brackets Large - $15.00
Brake Caliper - $30.00 to $40.00
Brake Levers (pr) - $20.00
​Brake Pedal - $10.00
​Brake Rotor (center & Edges) - $60.00
Chain Guard - $20.00
Cam Cover - $30.00
​Coil Bracket - $10.00
Control Arm - $20.00
​Cylinder Head - $60.00
​Derby Cover - $20.00 to $30.00
Fender - $80.00 to $120.00
Foot Pegs - $5.00 each
Frame ATV - $250.00
​Frame Harley - $250.00 to $300.00
​Frame Sport Bike - $200.00 to $250.00
​Frame Swing Arm - $60.00 to $100.00
Forks - $30.00 each
Handle Bars Small - $30.00
Handle Bars Large - $40.00
​Handle Bar clamp/risers - $20.00
Handle Bar switch housing - $20.00
​Headlight Bucket - $15.00
Headlight Ring - $12.00
Horn Cover - $10.00
​Hubs - $40.00 to $50.00 each
Inspection Cover - $10.00
Kick Stand - $10.00
Master Cylinder - $30.00
Master Cylinder Cover $10.00
Oil Pump Cover - $15.00
​Oil Pump Housing - $40.00
Primary Cover - $60.00
​Pushrod Tubes (all 4) - $30.00
​Rocker Boxes (3 pc) - $45.00
Sissy Bar - $40.00 to $60.00
Skid Plate - $20.00 to $40.00
​Springs - $20.00
​Sprocket - $30.00 to $40.00
Sprocket Cover - $15.00 each
Strut Covers - $20.00 each
Swing Arm - $60.00 to $80.00 each
Switch Housing - $20.00
​Triple Trees - $60.00/pair
​Visor Cover - $15.00
​Washers - $1 each​
Call us if you don't see pricing for your items.